MAX4566CPE+
| Parameters | |
|---|---|
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 25pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω (Typ) |
| Crosstalk | -85dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 100ns |
| Length | 19.175mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Analog IC - Other Type | AUDIO/VIDEO SWITCH |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±2.7V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 350MHz |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 2.5pF 2.5pF |
| On-state Resistance Match-Nom | 1Ohm |
MAX4566CPE+ Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Through Hole. 2:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around 0°C~70°C. A total of 16 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. The electrical component body receives 16 pins. Based on SPST - NO/NC switching circuits, these analog multiplexers work. Circuits number 2 make up this analogue multiplexer. In this analog multiplexer, the value is Multiplexer or Switches. There is an analog IC AUDIO/VIDEO SWITCH integrated with this board. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.
MAX4566CPE+ Features
1 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 350MHz
MAX4566CPE+ Applications
There are a lot of Maxim Integrated MAX4566CPE+ Analog Switches & Multiplexers ICs applications.
- Central office
- Audio and video signal routing
- Industrial control systems
- Precision data acquisition
- New designs requiring multiplexer functions
- Medical
- Power routing
- Digital cross connects (DSX-1)
- Avionics and Military Systems
- Residential Gateways, Home Gateway/Router