| Parameters |
| Surface Mount |
NO |
| JESD-609 Code |
e0 |
| Pbfree Code |
no |
| Part Status |
Obsolete |
| Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
| Number of Terminations |
16 |
| Terminal Finish |
TIN LEAD |
| Technology |
CMOS |
| Terminal Position |
DUAL |
| Terminal Form |
THROUGH-HOLE |
| Peak Reflow Temperature (Cel) |
240 |
| Number of Functions |
2 |
| Supply Voltage |
15V |
| Terminal Pitch |
2.54mm |
| Time@Peak Reflow Temperature-Max (s) |
20 |
| Pin Count |
16 |
| JESD-30 Code |
R-PDIP-T16 |
| Operating Temperature (Max) |
85°C |
| Operating Temperature (Min) |
-40°C |
| Supply Voltage-Max (Vsup) |
20V |
| Temperature Grade |
INDUSTRIAL |
| Supply Voltage-Min (Vsup) |
4.5V |
| Number of Channels |
3 |
| Analog IC - Other Type |
3PST |
| Neg Supply Voltage-Nom (Vsup) |
-15V |
| On-State Resistance (Max) |
6Ohm |
| Off-state Isolation-Nom |
30 dB |
| Neg Supply Voltage-Max (Vsup) |
-20V |
| On-state Resistance Match-Nom |
0.5Ohm |
| Switch-on Time-Max |
325ns |
| Switch-off Time-Max |
325ns |
| Neg Supply Voltage-Min (Vsup) |
-4.5V |
| Height Seated (Max) |
4.572mm |
| Length |
19.175mm |
| Width |
7.62mm |
| RoHS Status |
Non-RoHS Compliant |
MAX4554EPE Overview
The total number of terminations is 16. This electronic part offers high-quality output due to its 3 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. Electronic part bodies are injected with 16 pins. There is an integrated analog IC 3PST in the module. This digital multiplexer requires 4.5V voltage as a minimum supply voltage. If the digital multiplexer is exposed to temperatures higher than 85°C, it may malfunction. A setting of over -40°C should be applied to the operating environment.
MAX4554EPE Features
3 Channels
MAX4554EPE Applications
There are a lot of Rochester Electronics, LLC MAX4554EPE Analog Switches & Multiplexers ICs applications.
- Public switching systems
- Intelligent PBX
- Voice over IP/DSL – Integrated Access Devices, Smart
- Private Branch Exchange (PBX)
- SONET
- Relay replacements
- Battery Powered Instruments
- Fiber In The Loop (FITL)
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Digital Cross-Connects