MAX4535CPD+
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4535 |
| Pin Count | 14 |
| JESD-30 Code | R-PDIP-T14 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 4pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 275ns, 200ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -53dB @ 1MHz |
| Length | 19.05mm |
| RoHS Status | ROHS3 Compliant |
MAX4535CPD+ Overview
This electronic part is conveniently packaged in 14-DIP (0.300, 7.62mm), making it easy to ship abroad. To ensure high reliability, a new packaging method Tube is used. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a number of circuits 2:1. Around 0°C~70°C TA is the extended operating temperature. Total terminations are 14. The electronic part provides high-quality output because it has 2 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. Electronic part bodies are injected with 14 pins. Unlike digital switches, these are based on DPST - NO switching circuits. Circuits number 2 make up this analogue multiplexer. Try searching for MAX4535 variants of the analog switch ic. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER.
MAX4535CPD+ Features
2 Channels
Switch Circuit: DPST - NO
MAX4535CPD+ Applications
There are a lot of Maxim Integrated MAX4535CPD+ Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- Routers
- Digital cross connects (DSX-1)
- Cable PC
- Multi-Line E1 Interface Cards
- PBXs
- Residential Gateways, Home Gateway/Router
- Video signal routing
- Data Acquisition Systems
- Relay Replacement