MAX4516EPA
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4516 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±1V~6V |
| Supply Current-Max (Isup) | 0.2mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 20Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 86 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 10pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 75ns |
| Normal Position | NO |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX4516EPA Overview
Due to its 8-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have a number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. In total, there are 8 terminations. The electronic part provides high-quality output because it has 1 channels. A 5V voltage supply should turn on and run the electronic component. This electronic part can be found in the 8 series. Circuits based on SPST - NO switching are used to construct these analog switch ics. The circuits in this analogue multiplexer number 1. Search with MAX4516 if you are looking for analog multiplexer variants. A analogue multiplexer of this type is a Multiplexer or Switches.
MAX4516EPA Features
1 Channels
Switch Circuit: SPST - NO
MAX4516EPA Applications
There are a lot of Maxim Integrated MAX4516EPA Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- Data switching
- New designs requiring multiplexer functions
- SONET
- HDTV
- Digital cross connects (DSX-1)
- Power routing
- PDH Multiplexers
- Avionics and Military Systems
- Cross Connects