MAX4515ESA+T
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4515 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Nominal Supply Current | 20μA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 100 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 150 ns |
| On-State Resistance (Max) | 20Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 2pC |
| Voltage - Supply, Single (V+) | 2V~12V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
MAX4515ESA+T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-SOIC (0.154, 3.90mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. In total, there have been 8 terminations. By its 1 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 12V voltage supply. This electrical component is included in the 8 series of products. Circuits based on SPST - NC switching are used to construct these analog switch ics. This multiplexer is composed of 1 circuits. Search with MAX4515 if you are looking for analog multiplexer variants. A 10Ohm internal resistance characterizes this multiplexer. Multiplexers should not be powered above 12V in normal situations. Digital switch that provides Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 2V. 2μA current would be enough for this multiplexer to operate. Analogue multiplexers require a 2V~12V voltage to drain from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. 9V operating voltages can be used with this electrical part.
MAX4515ESA+T Features
1 Channels
Switch Circuit: SPST - NC
2μA Supply Current
MAX4515ESA+T Applications
There are a lot of Maxim Integrated MAX4515ESA+T Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- Fault Tolerant Systems
- SONET/SDH ADM
- Imaging
- Fiber to the Home
- Video switching
- Data Acquisition Systems
- MP3 players
- Avionics test equipment
- Optical Applications