MAX4514ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4514 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Supply Current-Max (Isup) | 0.02mA |
| On-State Resistance (Max) | 20Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 2pC |
| Voltage - Supply, Single (V+) | 2V~12V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX4514ESA+ Overview
This electronic part is conveniently packaged in 8-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 8 terminations. The electronic part provides high-quality output because it has 1 channels. It is safe to turn on and run the electronic component with a 12V voltage supply. This electronic part can be found in the 8 series. A SPST - NO switching circuit is used for these analog switches. There are 1 circuits in this switch device. Try searching with MAX4514 if you're looking for variants. Analogue multiplexers require a 2V~12V voltage to drain from a single voltage supply.
MAX4514ESA+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4514ESA+ Applications
There are a lot of Maxim Integrated MAX4514ESA+ Analog Switches & Multiplexers ICs applications.
- Battery Powered Systems
- Audio signal routing
- Data switching
- Video switching
- Communications systems
- Isolation
- Cross Connects
- Microwave transmission systems
- Audio/video switches
- Optical Applications