MAX4504CPA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 250Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4504 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-3/+-5V |
| Supply Voltage-Min (Vsup) | 1V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 1μA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 250Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 3pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1pC |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±1V~6V |
| Length | 9.375mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4504CPA Overview
Shipping overseas is convenient with the electronic component packed in 8-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. In Through Hole, this analog switch is mounted. There is 1:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around 0°C~70°C TA. The total number of terminations is 8. High-quality output is provided by the electronic component's 1 channels. A 5V voltage supply should turn on and run the electronic component. An injection of 8 pins is performed into the body of the electrical component. A SPST - NC switching circuit is used for these analog switches. Circuits number 1 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with MAX4504. An switch multiplexer with 250Ohm internal resistance has a value of 250Ohm. The analogue multiplexer in this example is a typical Multiplexer or Switches. Digital switch that provides Dual power at a cost-effective price. An operating current of 1μA would be sufficient for this switch device. It can conduct in a 2-bit manner. This analog switch ic needs a voltage of 1V as its minimum supply voltage.
MAX4504CPA Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
2-Bit
MAX4504CPA Applications
There are a lot of Maxim Integrated MAX4504CPA Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- Intelligent PBX
- Private Branch Exchange (PBX)
- High reliability control systems
- Transmit
- Microwave transmission systems
- Battery-powered systems
- Power routing
- Data switching
- Optical Applications