MAX4502ESA
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 250Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4502 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Throw Configuration | SPST |
| Supply Type | Single |
| On-State Resistance (Max) | 250Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 100 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 3pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 75ns, 50ns |
| Charge Injection | 1pC |
| Switch-on Time-Max | 75ns |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NC |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C TA |
MAX4502ESA Overview
This electronic part is conveniently packaged in 8-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 8. A electrical component with 1 channels is capable of high-quality output. A 5V voltage supply should turn on and run the electronic component. 8 pins are injected to the electronic part body. SPST - NC switching circuits are used in these analog switch ics. This multiplexer is composed of 1 circuits. Try searching for MAX4502 variants of the analog switch ic. An switch multiplexer with 250Ohm internal resistance has a value of 250Ohm. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 12V voltage to the switch device. Analog switch ics with Single supply type are cost-effective. There should be 2V voltage fed to the electrical part below 2V. This multiplexer would work with 1μA current. Analogue multiplexers require a 2V~12V voltage to drain from a single voltage supply.
MAX4502ESA Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
MAX4502ESA Applications
There are a lot of Maxim Integrated MAX4502ESA Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- Audio and video routing
- Cross Connects
- Battery Powered Systems
- E1 Network Equipment
- Ultrasound
- Sample hold systems
- Industrial
- Channelized and Unchannelized DS3 applications
- PBXs