MAX4200EUK-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 571mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4200 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Operating Supply Current | 2.2mA |
| Output Current | 90mA |
| Supply Current-Max | 4mA |
| Slew Rate | 4200V/μs |
| Amplifier Type | Buffer |
| Current - Input Bias | 800nA |
| Voltage - Supply, Single/Dual (±) | ±4V~5.5V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 1mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 0.35dB |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Supply Voltage Limit-Max | 6V |
| -3db Bandwidth | 660MHz |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Input Voltage Noise Density | 2.1nV/sqrt Hz |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4200EUK-T Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 5. Buffer amplifier has a total of 5 pins on it. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 5 pins. Op amp rates 1mV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.2mA and 10 . There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels.
MAX4200EUK-T Features
5 Pins
supply voltage of 5V
0.35dB voltage gain
MAX4200EUK-T Applications
There are a lot of Maxim Integrated MAX4200EUK-T Instrumentational OP Amps applications.
- Medical imaging
- Proportional counter tubes
- Non-polarized electrodes
- Oscilloscopes
- Voltage regulation circuit
- Home audio systems
- Cinema or auditorium audio system
- Digital cameras
- PDA
- Subtraction operation circuits