MAX4128ESA+
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 6.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4128 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3.25V |
| Number of Channels | 2 |
| Operating Supply Current | 725μA |
| Nominal Supply Current | 650μA |
| Output Current | 50mA |
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6.5V ±1.35V~3.25V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 25MHz |
| Unity Gain BW-Nom | 25000 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.16μA |
| Low-Offset | YES |
| Frequency Compensation | YES AVCL>=10 |
| Supply Voltage Limit-Max | 7.5V |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Power | NO |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
MAX4128ESA+ Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 6.5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 250μV voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Operational amplifier can operate supply current at 725μA. There should be no change in the voltage gain at 106dB. 2 channels are available on the instrumentation amplifier. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3.25V voltage.
MAX4128ESA+ Features
8 Pins
supply voltage of 6.5V
106dB voltage gain
Output Type: Rail-to-Rail
MAX4128ESA+ Applications
There are a lot of Maxim Integrated MAX4128ESA+ Instrumentational OP Amps applications.
- Biopotential
- Communication
- Communication device
- Integrator circuits
- Information processing
- Gaming industry
- Multiplication circuits
- Signal filtering
- Video conversion and routing
- Weak signal detection