MAX4066CPD
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 45Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -86dB @ 1MHz |
| Switch-on Time-Max | 125ns |
| Switch-off Time-Max | 75ns |
| Voltage - Supply, Single (V+) | 2V~16V |
| Length | 19.05mm |
| RoHS Status | Non-RoHS Compliant |
MAX4066CPD Overview
The electronic component is convenient to ship overseas because it is packed in a 14-DIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. In Through Hole, you'll find this switch device. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around 0°C~70°C TA. 14 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. A key feature of the 14 series is the inclusion of this electronic part as part of its design. Circuits based on SPST - NO switching are used to construct these analog switch ics. It consists of 4 circuits. A voltage of 2V~16V is required to drain this analog switch from a single voltage supply.
MAX4066CPD Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 100MHz
MAX4066CPD Applications
There are a lot of Rochester Electronics, LLC MAX4066CPD Analog Switches & Multiplexers ICs applications.
- PBXs
- Channelized and Unchannelized DS3 applications
- Signal routing between systems
- Relay replacements
- Industrial control systems
- Mechanical reed relay replacement
- Central office
- Voice over IP/DSL – Integrated Access Devices, Smart
- Routers
- Battery-powered systems