MAX396CPI
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2016 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX396 |
| Pin Count | 28 |
| JESD-30 Code | R-PDIP-T28 |
| Qualification Status | Not Qualified |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~16V ±2.7V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 80pF |
| On-state Resistance Match-Nom | 1.8Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.8 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 200ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 5.08mm |
| Length | 36.83mm |
| RoHS Status | Non-RoHS Compliant |
MAX396CPI Overview
The electronic component is convenient to ship overseas because it is packed in a 28-DIP (0.600, 15.24mm). In order to provide high reliability, an advanced packaging method Tube is used. In Through Hole, this analog switch is mounted. There is 16:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around 0°C~70°C TA. In total, there have been 28 terminations. As a result of its 16 channels, this electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electronic part body is injected with 28 pins. A total of 1 circuits make up this switch device. Try searching with MAX396 if you're looking for variants. A analogue multiplexer of this type is a Multiplexer or Switches. Integrated with SINGLE-ENDED MULTIPLEXER analog IC.
MAX396CPI Features
16 Channels
MAX396CPI Applications
There are a lot of Maxim Integrated MAX396CPI Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Digital Cross-Connects
- Cable PC
- Remote Powered Equipment
- Digital cross connects (DSX-1)
- Ultrasound
- Signal routing between systems
- Cellular phones
- DSLAMs
- Optical Applications