MAX382EPN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX382 |
| Pin Count | 18 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2.7V~16.5V ±3V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 40pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 4 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 275ns |
| Switch-off Time-Max | 275ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 4.572mm |
| Length | 22.86mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX382EPN Overview
Due to its 18-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. Through Hole is where this multiplexer is located. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. In total, there are 18 terminations. By its 8 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 5V voltage supply. A total of 18 pins are injected into the electrical part body. A total of 1 circuits make up this switch device. Try searching for MAX382 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 100Ohm. It is a typical Multiplexer or Switches analog multiplexer. Integrated with SINGLE-ENDED MULTIPLEXER analog IC.
MAX382EPN Features
8 Channels
MAX382EPN Applications
There are a lot of Maxim Integrated MAX382EPN Analog Switches & Multiplexers ICs applications.
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Frame Relay Equipment
- Precision instrumentation
- PDH Multiplexers
- New designs requiring multiplexer functions
- Channelized and Unchannelized DS3 applications
- USB 1.1 signal switching circuits
- High reliability control systems
- Precision data acquisition
- SONET