MAX379CPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 3.5kOhm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 68 dB |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 12pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 400ns, 300ns (Typ) |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 1000ns |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
MAX379CPE Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 4:1. Operation at a temperature around 0°C~70°C TA. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 4 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. An electrical component like this is included in the 16 series. A SP4T switching circuit is used for these analog switches. The multiplexer consists of 2 circuits. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. Providing power to the analogue multiplexer requires a voltage of 4.5VV.
MAX379CPE Features
4 Channels
Switch Circuit: SP4T
MAX379CPE Applications
There are a lot of Rochester Electronics, LLC MAX379CPE Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Low-Voltage
- Audio and video routing
- Medical systems
- Battery-powered systems
- Precision instrumentation
- Video switching
- Cross Connects
- Digital access cross connects
- Data Acquisition Systems