MAX337EAI+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX337 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 4.5V~20V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 20pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Charge Injection | 3.5pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -86dB @ 100kHz |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Height Seated (Max) | 1.99mm |
| RoHS Status | ROHS3 Compliant |
MAX337EAI+T Overview
Shipping overseas is convenient due to the electrical component's packing in 28-SSOP (0.209, 5.30mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Extended operating temperature around -40°C~85°C TA. Totally, there are 28 terminations. This electronic part offers high-quality output due to its 8 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. A total of 28 pins are injected into the electrical part body. There are 2 circuits in this switch device. Try searching with MAX337 to find analog multiplexer variants. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC.
MAX337EAI+T Features
8 Channels
MAX337EAI+T Applications
There are a lot of Maxim Integrated MAX337EAI+T Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Cellular phones
- Audio and video switching
- Relay Replacement
- 65 V DACs
- ATM
- Frame Relay Equipment
- Ultrasound
- E1 Multiplexer
- Automatic test equipment