MAX337CPI+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1997 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX337 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 4.5V~20V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 400Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 20pA |
| Channel Capacitance (CS(off), CD(off)) | 2pF 20pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Time (Ton, Toff) (Max) | 500ns, 500ns |
| Charge Injection | 3.5pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -86dB @ 100kHz |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 500ns |
| Height Seated (Max) | 5.08mm |
| Length | 36.83mm |
| RoHS Status | ROHS3 Compliant |
MAX337CPI+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 28-DIP (0.600, 15.24mm). The advanced packaging method Tube provides high reliability. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 8:1. Operating temperature extended to 0°C~70°C TA. 28 terminations have been made so far. High-quality output is provided by the electronic component's 8 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. The electrical component body receives 28 pins. A total of 2 circuits make up this switch device. Search with MAX337 if you are looking for analog multiplexer variants. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC.
MAX337CPI+ Features
8 Channels
MAX337CPI+ Applications
There are a lot of Maxim Integrated MAX337CPI+ Analog Switches & Multiplexers ICs applications.
- Data switching
- Voice over IP/DSL – Integrated Access Devices, Smart
- SDH/SONET multiplexers
- Wireless Local Loop
- Automatic test equipment
- Relay replacements
- Isolation
- Cable Modem
- MP3 players
- Public switching systems