MAX324ESA+
| Parameters | |
|---|---|
| Number of Circuits | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 100pA |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 125 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 400 ns |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 72 dB |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 100ns |
| Voltage - Supply, Single (V+) | 2.7V~16V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 175Ohm |
| Terminal Finish | TIN |
| Max Power Dissipation | 471mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX324 |
| Pin Count | 8 |
| Number of Channels | 1 |
MAX324ESA+ Overview
Presented in 8-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. The advanced packaging method Tube provides high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 8. A 1 channel electronic part produces high-quality output. A 5V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 8 series. Unlike digital switches, these are based on SPST - NC switching circuits. This multiplexer is composed of 2 circuits. Try searching with MAX324 to find analog multiplexer variants. There is 175Ohm internal resistance in this digital multiplexer. Datasheets for functions of 8 pins are available. An abnormal situation would be for the switch device to be supplied with a voltage greater than 16V. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 2.7V. It would be sufficient to run this analogue multiplexer with 1μA current. The voltage required by this switch device is 2.7V~16V, draining from a single voltage supply. Put voltage above 1μA on the multiplexer to cause damage.
MAX324ESA+ Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
MAX324ESA+ Applications
There are a lot of Maxim Integrated MAX324ESA+ Analog Switches & Multiplexers ICs applications.
- PDAs
- Isolation
- E1 Multiplexer
- Remote Powered Equipment
- Communication systems
- Avionics test equipment
- Remote wireless modules
- Cross Connects
- Cellular phones
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8