MAX303CPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX303 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5+-15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 35Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 100ns |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX303CPE Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). High reliability is ensured by the advanced packaging method Tube. The multiplexer is located in Through Hole. There is 2:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around 0°C~70°C TA. Total terminations are 16. By its 1 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. The electronic part body is injected with 16 pins. Based on SPDT switching circuits, these analog multiplexers work. A 2 circuit is present in this switch device. Use MAX303 to search for variants of the digital switches. A analogue multiplexer of this type is a Multiplexer or Switches. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. Don't miss this electronic component's additional features, such as: ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY.
MAX303CPE Features
1 Channels
Switch Circuit: SPDT
Additional Features: ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY
MAX303CPE Applications
There are a lot of Maxim Integrated MAX303CPE Analog Switches & Multiplexers ICs applications.
- CSU
- High speed data transmission line cards
- Audio signal routing
- SONET/SDH ADM
- Wireless Local Loop
- Access Concentrators
- Multi-Line E1 Interface Cards
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- New designs requiring multiplexer functions
- Sample-and-hold systems