MAX15013BASA+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 470.6mW |
| Technology | BICMOS |
| Voltage - Supply | 8V~12.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX15013 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 2A |
| Nominal Supply Current | 3mA |
| Max Supply Current | 3mA |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 65ns |
| Fall Time (Typ) | 65 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 65ns 65ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 63 µs |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2V |
| Turn Off Time | 63 µs |
| High Side Voltage - Max (Bootstrap) | 175V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX15013BASA+T Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Tape & Reel (TR) represents the package.For its configuration, it incorporates 2 drivers.Its recommended mounting way is Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 8V~12.6V.This gate type has a N-Channel MOSFET design.For this device, the temperature range is -40°C~150°C TJ.The input type is Inverting, Non-Inverting.It's configured with 8 terminations.Under its base part number MAX15013, various related parts can be found.The device is mounted using Surface Mount.There are 8 pins available in the device.Specification is for 12V supply voltage operation.2A is the maximum output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The number of component pins is 8.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 175V.According to its maximum power dissipation, 470.6mW is capable of conducting and transferring a large amount of power without overheating.To maintain higher stability, the supply current should always be 3mA.
MAX15013BASA+T Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 175V
Maximum power dissipation of 470.6mW
MAX15013BASA+T Applications
There are a lot of Maxim Integrated MAX15013BASA+T gate drivers applications.
- RGB applications
- Power factor correction (PFC) circuits
- Portable computers
- High frequency line drivers
- Industrial Power Supplies
- Motor Control
- UPS systems
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Industrial Motor Inverter - Power Tools, Robotics
- Portable Media Players