MAX13486EESA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 471mW |
| Technology | BICMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX13486 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 4.5mA |
| Data Rate | 16Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 25mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Half Duplex |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX13486EESA+ Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-SOIC (0.154, 3.90mm Width) package.There is a Tube package for this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Surface Mount-type PCB or development board, this wide receiver can be placed.Power supply requirements for this differential driver are 4.75V~5.25V.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.In most applications, this ic receiver is used in environments where -40°C~85°C is the operating temperature.This line driver ic can operate efficiently with a supply voltage range of 5V.Wide receiver has 8 terminations built in for driving or receiving signals from data.ICs that are packaged with market standard pinouts are available on the market.Since the part number MAX13486 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.8-pin driver chip with enhanced power dissipation.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.Typically, the resolution of this receiver is specified to be 1 bits.There is a voltage supply of 5V required in order for this transceiver module to be operated.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.ICs implement a total of 1 transceivers.
MAX13486EESA+ Features
Tube package
8 pin count
8 pins
5V power supply
MAX13486EESA+ Applications
There are a lot of Maxim Integrated MAX13486EESA+ Drivers/Receivers/Transceivers applications.
- Servers
- Structural bonding
- Automation systems
- Point-to-point networking
- Tuner
- Fiber optic cable connection network
- Single to Multimode Fiber Conversion
- Wireless network systems
- 1x/2x Fiber Channel
- Wireless 3D game