M74HC670B1R
| Parameters | |
|---|---|
| Output Enable | NO |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Memory ICs |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M74HC67 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 1 |
| Operating Mode | ASYNCHRONOUS |
| Propagation Delay | 31 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 330 ns |
| Number of Inputs | 4 |
| Organization | 4X4 |
| Output Characteristics | 3-STATE |
| Logic Type | Register File |
| Memory Width | 4 |
| Access Time (Max) | 280 ns |
| High Level Output Current | -5.2mA |
| Parallel/Serial | PARALLEL |
| Low Level Output Current | 5.2mA |
| Memory IC Type | STANDARD SRAM |
M74HC670B1R Overview
16-DIP (0.300, 7.62mm) is a package containing the embedded device. Taking the total number of terminations on the chip and adding them up, we get 16. Presented in a case of Tube. Its operating supply voltage is rated at 4.5V. 1 elements are present in this part. In this device, there are 16 pins. It is recommended to mount by Through Hole in order to get the best results. There is a component mounted in the way of Through Hole on this board. A temperature range of -55°C~125°C is used for operation. The voltage supplied to it is within the range of 2V~6V. In this case, the electrical component belongs to the series 74HC. If you use the M74HC67 family, you can find parts that are similar. This part must have a minimum supply voltage (Vsup) of 2V. There is a capability to deliver voltage at 2/6V. 6V Vsup is the maximum supply voltage (Vsup) for this part. A quiescent current of 4μA is used to run the device. It belongs to the subcategory of Other Memory ICs.
M74HC670B1R Features
With 16 pins
Mounted in Through Hole type.
Based on M74HC67 family
It supplies 2/6V power
Quiescent Current at 4μA
M74HC670B1R Applications
There are a lot of STMicroelectronics M74HC670B1R Shift Registers applications.
- Output expansion
- data manipulation
- data transfer
- Parallel data
- Data manipulation
- Serial to parallel converter
- Counter
- LED matrix control
- Pseudo Random Pattern Generator
- 8-bit data storage