M74HC595TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M74HC59 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Number of Bits | 8 |
| Propagation Delay | 285 ns |
| Turn On Delay Time | 285 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 3 |
| fmax-Min | 24 MHz |
| Height | 1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC595TTR Overview
This device can be found embedded within the package 16-TSSOP (0.173, 4.40mm Width). 16 is the sum of the number of terminations in the chip. The Tape & Reel (TR) case contains it. The part's operating supply voltage is rated 4.5V. 1 elements are present in this part. It has 16 pins. It is recommended to mount by Surface Mount in order to get the best results. In this case, the electronic component belongs to the HC/UH. As you can see, this component is mounted in the way of Surface Mount. A temperature range of -55°C~125°C is used for operation. There is a votage of 2V~6V provided with it. It is part of the 74HC series of electrical components. Similar parts can be found by searching for the M74HC59 family. There should be no voltage less than 2V at the minimum supply voltage (Vsup). It can deliver voltage at 2/6V. It is recommended that the maximum supply voltage for this part is not greater than 6V (Vsup). IC chips contain a total of 8 bits. It is necessary to operate 3 output lines. This device has 8 circuits.
M74HC595TTR Features
With 16 pins
Mounted in Surface Mount type.
Based on M74HC59 family
It supplies 2/6V power
With 3 output lines
M74HC595TTR Applications
There are a lot of STMicroelectronics M74HC595TTR Shift Registers applications.
- ROM Chips
- Data Format Converters
- Serial-to-parallel data conversion
- data transfer
- Parallel to serial converter
- Serial-to-parallel data conversion
- Remote control holding register
- store data in digital form
- Cache memory in CPU
- 8-bit data storage