M74HC109RM13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M74HC109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Voltage | 5V |
| Number of Circuits | 2 |
| Clock Frequency | 67MHz |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 5 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
M74HC109RM13TR Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Differentialas the output. This trigger uses the value Positive Edge. Surface Mountmounts this electrical part. A voltage of 2V~6Vis used as the supply voltage. Currently, the operating temperature is -55°C~125°C TA. This logic flip flop is classified as type JK Type. It is a type of FPGA belonging to the 74HC series. You should not exceed 67MHzin the output frequency of the device. This process consumes 2μA quiescents. A total of 16terminations have been recorded. Members of the M74HC109family make up this object. A voltage of 4.5V is used as the power supply for this D latch. There is 5pF input capacitance for this T flip flop. It is a member of the HC/UHfamily of D flip flop. Surface Mount mounts this electronic component. A total of 16pins are provided on this board. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. The superior flexibility of this circuit is achieved by using 2 circuits. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. Currently, there are 5 input lines present.
M74HC109RM13TR Features
Tape & Reel (TR) package
74HC series
16 pins
M74HC109RM13TR Applications
There are a lot of STMicroelectronics M74HC109RM13TR Flip Flops applications.
- Buffered Clock
- Frequency division
- High Performance Logic for test systems
- Balanced 24 mA output drivers
- Buffer registers
- Matched Rise and Fall
- Counters
- Data Synchronizers
- Data transfer
- Differential Individual