M5-256/68-15VC/1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-256 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Number of Gates | 10000 |
| Max Frequency | 83.3MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
M5-256/68-15VC/1 Overview
There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.In the 100-LQFPpackage, you will find it.The device is programmed with 68 I/O ports.There is a 100terminations set on devices.Its terminal position is QUAD.An electrical supply voltage of 5V is used to power it.It is a part of family [0].Trayshould be used to package the chip.To ensure reliability, the device operates at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the MACH? 5 series.It is equipped with 100 pin count.This device also displays [0].In accordance with the [0], its related parts are listed.10000gates are devices that serve as building blocks for digital circuits.If high efficiency is desired, the supply voltage should be kept at [0].In general, it is recommended to store data in [0].Surface Mountis used to mount this electronic component.There are 100 pins on the device.A maximum supply voltage of 5.25Vis used in its operation.Despite its minimal supply voltage of [0], it is capable of operating.A total of 5V power supplies are needed to run it.It is important to make sure that the maximum frequency is less than 83.3MHz.
M5-256/68-15VC/1 Features
100-LQFP package
68 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
5V power supplies
M5-256/68-15VC/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-256/68-15VC/1 CPLDs applications.
- Cross-Matrix Switch
- I/O PORTS (MCU MODULE)
- Complex programmable logic devices
- Code converters
- ON-CHIP OSCILLATOR CIRCUIT
- I2C BUS INTERFACE
- State machine control
- Dedicated input registers
- USB Bus
- ANALOG-TO-DIGITAL CONVERTOR (ADC)