M5-256/160-20YI/1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-256 |
| Pin Count | 208 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 160 |
| Memory Type | EEPROM |
| Propagation Delay | 20 ns |
| Number of Gates | 10000 |
| Max Frequency | 83.3MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 20ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M5-256/160-20YI/1 Overview
In the mobile phone network, there are 256macro cells, which are cells with high-power antennas and towers.The item is enclosed in a 208-BFQFP package.It is equipped with 160I/O ports.208terminations are programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.Ideally, the chip should be packaged by Tray.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.There should be a Surface Mounton the chip.As part of the MACH? 5series, it is a type of FPGA.Chips are programmed with 208 pins.When using this device, YEScan also be found.In accordance with the [0], its related parts are listed.A digital circuit can be constructed using 10000gates.For storing data, it is recommended to use [0].A maximum voltage of 5.5Vis required for operation.Initially, it requires a voltage of 4.5Vas the minimum supply voltage.In order for the device to operate, it requires 5V power supplies.It is recommended that the maximal frequency be lower than 83.3MHz.
M5-256/160-20YI/1 Features
208-BFQFP package
160 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
5V power supplies
M5-256/160-20YI/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-256/160-20YI/1 CPLDs applications.
- DMA control
- Custom state machines
- Storage Cards and Storage Racks
- Software Configuration of Add-In Boards
- Timing control
- Boolean function generators
- Software-driven hardware configuration
- Voltage level translation
- ON-CHIP OSCILLATOR CIRCUIT
- High speed graphics processing