M5-256/120-10YI/1
| Parameters | |
|---|---|
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-256 |
| Pin Count | 160 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 120 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 10000 |
| Max Frequency | 125MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 160-BQFP |
| Number of Pins | 160 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1995 |
M5-256/120-10YI/1 Overview
This network has 256macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).You can find it in package [0].It is equipped with 120I/O ports.The device is programmed with 160 terminations.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered from a supply voltage of 5V.This part is part of the family [0].Trayis the packaging method.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.It is recommended that Surface Mountholds the chip in place.In this case, it is a type of FPGA belonging to the MACH? 5 series.It is equipped with 160 pin count.The device can also be used to find [0].The M5-256contains its related parts.In digital circuits, there are 10000gates, which act as a basic building block.High efficiency requires a voltage supply of [0].Data is stored using [0].Surface Mountis the mounting point of this electronic part.There are 160 pins embedded in the device.It operates with the maximal supply voltage of 5.5V.Normally, it operates with a voltage of 4.5VV as its minimum supply voltage.In order for the device to operate, it requires 5V power supplies.It is recommended that the maximum frequency be less than 125MHz.
M5-256/120-10YI/1 Features
160-BQFP package
120 I/Os
The operating temperature of -40°C~85°C TA
160 pin count
160 pins
5V power supplies
M5-256/120-10YI/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-256/120-10YI/1 CPLDs applications.
- Multiple DIP Switch Replacement
- Pattern recognition
- TIMERS/COUNTERS
- High speed graphics processing
- ROM patching
- Digital multiplexers
- State machine control
- I2C BUS INTERFACE
- Software-Driven Hardware Configuration
- Complex programmable logic devices