M4A5-192/96-7VNI
| Parameters | |
|---|---|
| Number of Gates | 7500 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 680 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 16 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M4A5-192 |
| Pin Count | 144 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 96 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
M4A5-192/96-7VNI Overview
Currently, there are 192 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.A 144-LQFP package contains the item.As a result, it has 96 I/O ports programmed.144terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power source is powered by 5Vvolts.It is a part of family [0].It is recommended to package the chip by Tray.To ensure reliability, the device operates at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.It belongs to the ispMACH? 4Aseries of FPGAs.There are 144pins on the chip.This device can also display [0].The M4A5-192contains its related parts.7500gates are used to construct digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.Surface Mountis the mounting point of this electronic part.There are 144 pins embedded in the device.This device operates at a voltage of 5.5V when the maximum supply voltage is applied.In order for it to operate, a supply voltage of 4.5Vis required.A power supply of 5Vvolts is required to operate this device.There are 680 Programmable I/Os.The maximal frequency should be lower than 125MHz.The status of input signals is determined by 16dedicated inputs.
M4A5-192/96-7VNI Features
144-LQFP package
96 I/Os
The operating temperature of -40°C~85°C TA
144 pin count
144 pins
5V power supplies
M4A5-192/96-7VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-192/96-7VNI CPLDs applications.
- INTERRUPT SYSTEM
- Parity generators
- Digital multiplexers
- Address decoding
- Cross-Matrix Switch
- PLC analog input modules
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Power Meter SMPS
- DDC INTERFACE
- Complex programmable logic devices