M4A3-512/192-14FANI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A3-512 |
| Pin Count | 256 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 192 |
| Memory Type | EEPROM |
| Propagation Delay | 14 ns |
| Number of Gates | 20000 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 400 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 14ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
M4A3-512/192-14FANI Overview
There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 256-BGA package containing it.There are 192 I/Os on the board.Terminations of devices are set to [0].The terminal position of this electrical component is BOTTOM.The power source is powered by 3.3Vvolts.This part is in the family [0].It is recommended that the chip be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].There should be a Surface Mounton the chip.It is a type of FPGA belonging to the ispMACH? 4A series.Chips are programmed with 256 pins.It is also possible to find YESwhen using this device.Its related parts can be found in the [0].20000gates are devices that serve as building blocks for digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].There is a maximum supply voltage of 3.6V.The minimal supply voltage is 3V.Programmable I/Os are counted up 400.It is recommended that the maximal frequency be lower than 83.3MHz.
M4A3-512/192-14FANI Features
256-BGA package
192 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
M4A3-512/192-14FANI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-512/192-14FANI CPLDs applications.
- Custom shift registers
- ROM patching
- Power Meter SMPS
- Multiple Clock Source Selection
- PLC analog input modules
- Multiple DIP Switch Replacement
- Battery operated portable devices
- Address decoders
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Configurable Addressing of I/O Boards