M4A3-256/128-10YC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Number of Pins | 208 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | M4A3-256 |
| Pin Count | 208 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 10000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 145 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A3-256/128-10YC Overview
A mobile phone network consists of 256macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The item is packaged with 208-BFQFP.There are 128 I/Os on the board.208terminations are programmed into the device.This electrical part is wired with a terminal position of QUAD.The power supply voltage is 3.3V.It is a part of the family [0].The chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].The chip should be mounted by Surface Mount.As part of the ispMACH? 4Aseries, it is a type of FPGA.There are 208pins on the chip.It is also possible to find YESwhen using this device.You can find its related parts in the [0].10000gates are used to construct digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].A Surface Mountis mounted on this electronic component.There are 208 pins embedded in the device.With a maximum supply voltage of [0], it operates.In order for it to operate, a supply voltage of 3Vis required.There are 145 programmable I/Os in this system.It is recommended that the maximal frequency be lower than 100MHz.A total of 14dedicated inputs are available for the purpose of detecting input signals.
M4A3-256/128-10YC Features
208-BFQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
208 pins
M4A3-256/128-10YC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/128-10YC CPLDs applications.
- Multiple DIP Switch Replacement
- State machine control
- Auxiliary Power Supply Isolated and Non-isolated
- ToR/Aggregation/Core Switch and Router
- DMA control
- Pattern recognition
- Interface bridging
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Storage Cards and Storage Racks
- DDC INTERFACE