M4-128N/64-7JC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 84-LCC (J-Lead) |
| Number of Pins | 84 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | MACH® 4 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 84 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | NO |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4-128N |
| Pin Count | 84 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 5000 |
| Max Frequency | 182MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 4.57mm |
| Length | 29.3116mm |
| Width | 29.3116mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
M4-128N/64-7JC Overview
The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).84-LCC (J-Lead)is the package in which it resides.The device is programmed with 64 I/Os.There are 84 terminations programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.It is powered from a supply voltage of 5V.It is a part of the family [0].As a result, it is packaged as Tube.A reliable operation is ensured by the operating temperature of [0].It is recommended that Surface Mountholds the chip in place.The FPGA belongs to the MACH? 4 series.84pins are programmed on the chip.If you use this device, you will also find [0].In accordance with the [0], its related parts are listed.For digital circuits, there are 5000gates. These devices serve as building blocks.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, Surface Mountis used to mount the electronic component.This board has 84 pins.A maximum supply voltage of 5.25Vis used in its operation.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.The system runs on a power supply of 5V watts.It is recommended that the maximal frequency be lower than 182MHz.There are 2 dedicated inputs used to detect the status of input signals.
M4-128N/64-7JC Features
84-LCC (J-Lead) package
64 I/Os
The operating temperature of 0°C~70°C TA
84 pin count
84 pins
5V power supplies
M4-128N/64-7JC Applications
There are a lot of Lattice Semiconductor Corporation M4-128N/64-7JC CPLDs applications.
- I/O expansion
- Digital designs
- Cross-Matrix Switch
- State machine design
- Digital multiplexers
- I2C BUS INTERFACE
- Address decoding
- Boolean function generators
- Power automation
- ON-CHIP OSCILLATOR CIRCUIT