LV8549M-TLM-H
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-LSOP (0.173, 4.40mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2011 |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Bi-CMOS |
| Voltage - Supply | 4V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Terminal Pitch | 1mm |
| Base Part Number | LV8549M |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Max Output Current | 1A |
| Interface | Parallel |
| Nominal Supply Current | 1.7mA |
| Output Configuration | Half Bridge (4) |
| Voltage - Load | 4V~16V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LV8549M-TLM-H Overview
This package was designed with Cut Tape (CT)in mind.This part is packed in a 10-LSOP (0.173, 4.40mm Width) case.Ideally, the part should be mounted by Surface Mount.The component connected in General Purposematches it perfectly.The device can supply 4V~16V volts.The operating temperature ranges from -30°C~85°C TAto -30°C~85°C TA.There are 10 terminations available on this part.Voltage can be applied at a rate of 4V~16V volts to the load.I would like to remind you that this amplifier should be operated at 12V.There is a recommended mounting method of Surface Mount.As a result of the LV8549Mpart number, it can be found.10pins are present on the device.In the Motion Control Electronicsseries, it is included.The available outputs are [0].0 indicates that the motor type is [0].Its maximal output current reaches 1A to meet the operation requirements.
LV8549M-TLM-H Features
Applications : General Purpose
Load voltage across the chip 4V~16V
base on LV8549M number
designed with 2 outputs
Motor Type classified as Stepper
LV8549M-TLM-H Applications
There are a lot of ON Semiconductor LV8549M-TLM-H motor drivers applications.
- Multiple output capability
- PWM generators
- RGB and monochromatic LED drivers for signage and traffic signals
- Large outdoor LED display
- Landscape lighting
- Alternative to HID lights
- Street lights
- Hazardous application
- LED bias
- Display LED backlighting