LTC695CSW-3.3#PBF
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC695 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 600μA |
| Power Dissipation | 500mW |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.8V |
| Max Reset Threshold Voltage | 3V |
| Height Seated (Max) | 2.642mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.9 V |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
LTC695CSW-3.3#PBF Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Tube-packaging is used. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 16-SOIC (0.295, 7.50mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 3.3V is used to conduct the PMIC chip. When a supply voltage of 1 is applied to the power ic, it conducts. The power management system can be categorized as a Power Management Circuits chip. There are a total of 16 pins on power management. Power managment ic pin count is 16. IC management can only work with a supply voltage of 3V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during 0°C~70°C TA . As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. Supervisors are also additional features, such as [0] for example, which are worth mentioning. A similar IC managements number of the manufacturer can always be found by using LTC695, the base power ics number.
LTC695CSW-3.3#PBF Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3V
LTC695CSW-3.3#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC695CSW-3.3#PBF Voltage Supervisors applications.
- Detection of phase sequence
- Smart meter
- Electrical fire monitoring system
- WiFi router
- Urban rail transit weak current power monitoring
- Display equipment
- Stable power system
- Medical-specific insulation monitor
- External alarm
- Military communications