LTC6246HS6#TRMPBF
| Parameters | |
|---|---|
| Gain Bandwidth Product | 180MHz |
| Voltage Gain | 93.06dB |
| Power Supply Rejection Ratio (PSRR) | 69dB |
| -3db Bandwidth | 120MHz |
| Nominal Gain Bandwidth Product | 180MHz |
| Number of Amplifiers | 1 |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Packaging | Cut Tape |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 1.25mA |
| Slew Rate | 90 V/μs |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 400nA |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 180MHz |
LTC6246HS6#TRMPBF Overview
In order to protect the op amps, a SOT-23-6 case is used. In the case of Cut Tape cases, linear amplifier will be delivered. In total, the buffer amplifier consists of 6 pins. In terms of the input offset voltage, instrumentation amplifier rates at 50μV. The buffer amplifier is capable of operating from a supply current of 1.25mA . You should keep the voltage gain at 93.06dB for the time being. A linear amplifier like this has 1 circuits on it. As far as the device is concerned, buffer amplifier has 1 channels. It should not lower than -40°C to operate buffer amplifier. No temperature greater than 125°C should be used. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. This electric component can work from a voltage of under 5.25V as far as supply voltage is concerned. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.5V. There are 1 amplifiers on it.
LTC6246HS6#TRMPBF Features
93.06dB voltage gain
LTC6246HS6#TRMPBF Applications
There are a lot of Analog Devices, Inc. LTC6246HS6#TRMPBF Instrumentational OP Amps applications.
- Proportional counter tubes
- High-frequency data acquisition systems
- Fast A/D and D/A converters
- Exponential operation circuits
- Non-polarized electrodes
- Weighing systems
- Strain gauges
- E-book readers
- Computer workstations
- Scintillation detectors