LTC4211CMS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Feature | UVLO |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.5V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Depth | 3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4211 |
| Pin Count | 10 |
| Output Voltage | 140mV |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Output Current | 50mA |
| Adjustable Threshold | YES |
| Current - Supply | 1mA |
| Nominal Input Voltage | 17V |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP |
| Feature Pins | /FAULT, FB, FILTER, ON, /RESET, TIMER |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4211CMS#PBF Overview
The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package includes it.1 channels are currently available.A Tube-shaped package holds it.In total, it has 10 terminations.In this case, the device is located at terminal DUAL.A total of 10 pins are present on it.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 5V.The way it's set up is the way Surface Mount wants it.An electrical component classified as Hot Swap Controller belongs to this category.Hot-swappable device is recommended that the temperature is set to 0°C~70°C in order to ensure reliable performance.A General Purpose application is available for the device.The article is featured in UVLO.Hot-swappable device should work if you use a 2.5V~16.5VV power source.Hot-swappable device is included in the LTC4211 family of numbers.A 10 pin is used for operation.A gadget like this is self-contained in Power Management Circuits.Programmable features include Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP.Presently, there is a sufficient supply of 1mA.For normal operation, Vsup should be kept above 2.5V.The power supply of the part is referred to as 5V.With a 140mV output voltage, high efficiency is possible.
LTC4211CMS#PBF Features
The terminal position of 10
Features of UVLO
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP
Output voltage of 140mV
LTC4211CMS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4211CMS#PBF hot swap controllers applications.
- Switch
- Supply voltage monitoring
- Thermal limitation
- Base station
- PC board hot swap insertion and removal
- DC boost circuit
- Overvoltage protection
- Electric vehicle
- Servers
- Circuit breakers for high-side circuits