LTC2055IMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LTC2055 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Current - Supply | 130μA |
| Slew Rate | 0.5V/μs |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~6V |
| Gain Bandwidth Product | 500kHz |
| Unity Gain BW-Nom | 500 kHz |
| Average Bias Current-Max (IIB) | 0.00015μA |
| Low-Offset | YES |
| Voltage - Input Offset | 0.5μV |
| Low-Bias | YES |
| Micropower | YES |
| Input Offset Current-Max (IIO) | 0.0003μA |
| Voltage Gain-Min | 120 |
| Common-mode Reject Ratio-Min | 115 dB |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC2055IMS8#PBF Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. Op amps are Zero-Drift types of amplifier on the chip. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 3V volts. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. There are 2 circuits on op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. As a recommendation, this electronic component should be used with a power supply that can deliver 130μA. There is a minimum voltage gain of 120 that this buffer op amp is capable of conducting.
LTC2055IMS8#PBF Features
8 Pins
supply voltage of 3V
Output Type: Rail-to-Rail
LTC2055IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2055IMS8#PBF Instrumentational OP Amps applications.
- High input resistance broadband
- Power transmission
- Digital cameras
- Video data acquisition
- Fission chambers
- Non-polarized electrodes
- Video conversion and routing
- Mobile phone
- Signal transformation
- Thermocouples