LT6700IDCB-3#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Over-The-Top® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6700 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-N6 |
| Qualification Status | Not Qualified |
| Output Type | Open Collector |
| Number of Elements | 2 |
| Power Supplies | 1.4/18V |
| Supply Current-Max | 0.017mA |
| Response Time | 29000 ns |
| Voltage - Supply, Single/Dual (±) | 1.4V~18V |
| Average Bias Current-Max (IIB) | 0.015μA |
| Supply Voltage Limit-Max | 18.5V |
| Current - Quiescent (Max) | 17μA |
| Current - Input Bias (Max) | 0.01μA @ 18V |
| Hysteresis | 11.5mV |
| Propagation Delay (Max) | 29μs |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
LT6700IDCB-3#TRPBF Overview
To facilitate transportation, it comes packaged in 6-WFDFN Exposed Pad .Output type of this comparator is Open Collector .The part is shipped by Tape & Reel (TR) .Electronic comparator is possible to find the 6 terminals of the comparator.The component belongs to the Comparator family of electrical components.A comparator supplied with 5V voltage can complete many demanding tasks.Speaking of types, this is a typical with Voltage Reference comparator.There are a total of 2 elements in it.The device contains 6 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.Search LT6700 to find more pin-to-pin solutions.There is sufficient power to run the device from 1.4/18V power supplies.With a minimum current of 0.017mA , this part can be supplied.This part is from the Over-The-Top? comparator series.
LT6700IDCB-3#TRPBF Features
Open Collector output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
LT6700IDCB-3#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT6700IDCB-3#TRPBF linear comparators applications.
- Zero-Crossing Detectors
- Automatic Test Equipment
- Battery-Powered Electronics
- Infotainment and Clusters
- General Purpose Low Voltage Applications
- Power Supervision
- High-Speed Differential Line Receiver
- Factory automation & control
- Point of load regulators
- Analog front end