| Parameters |
| Min Dual Supply Voltage |
1.35V |
| Nominal Gain Bandwidth Product |
1MHz |
| Number of Amplifiers |
2 |
| REACH SVHC |
No SVHC |
| RoHS Status |
RoHS Compliant |
| Lead Free |
Lead Free |
| Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
| Package / Case |
SOIC |
| Number of Pins |
8 |
| Max Operating Temperature |
70°C |
| Min Operating Temperature |
0°C |
| Number of Elements |
2 |
| Number of Channels |
2 |
| Number of Circuits |
2 |
| Max Supply Voltage |
40V |
| Min Supply Voltage |
2.4V |
| Operating Supply Current |
850μA |
| Slew Rate |
0.35 V/μs |
| Common Mode Rejection Ratio |
106 dB |
| Current - Input Bias |
150pA |
| Output Current per Channel |
40mA |
| Input Offset Voltage (Vos) |
50μV |
| Bandwidth |
1MHz |
| Gain Bandwidth Product |
1MHz |
| Voltage Gain |
124.08dB |
| Power Supply Rejection Ratio (PSRR) |
106dB |
| Max Dual Supply Voltage |
18V |
LT1881ACS8#PBF Overview
The linear amplifier is packaged in a SOIC case. A total of 8 pins are present on the instrumentation amplifier. Op amp ic rates 50μV for input offset voltage. The buffer amplifier is capable of operating from a supply current of 850μA . You should keep the voltage gain at 124.08dB for the time being. A linear amplifier like this has 2 circuits on it. There are a total of 2 channels available on the op amps. This instrumentation amplifier cannot operate below 0°C degrees Celsius. A temperature greater than 70°C should not be used for the operation of this instrumentation amplifier. There are 2 elements in total in this linear amplifier. I would like to point out that this electrical component is capable of working from a voltage below 40V as far as the power supply is concerned. A voltage of 2.4V or higher is recommended for the linear amplifier's supply voltage. As a general rule, you should conduct this electronic component under dual supply voltages of 18V volts. The linear amplifier has 2 amplifiers.
LT1881ACS8#PBF Features
124.08dB voltage gain
LT1881ACS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1881ACS8#PBF Instrumentational OP Amps applications.
- Information processing
- Professional videography
- Laptop
- Medical instruments
- Measurements of Wheatstone bridge
- High speed sample
- Switching amplifier
- Video amplifiers
- Fission chambers
- High gain DC amplifier