LT1880CS5#TRPBF
| Parameters | |
|---|---|
| Voltage Gain | 124.08dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.35V |
| Nominal Gain Bandwidth Product | 1.1MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | SOT-23-5 |
| Number of Pins | 5 |
| Packaging | Tape & Reel (TR) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 2.4V |
| Operating Supply Current | 1.5mA |
| Slew Rate | 0.55 V/μs |
| Common Mode Rejection Ratio | 116 dB |
| Current - Input Bias | 150pA |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 150μV |
| Gain Bandwidth Product | 1.1MHz |
LT1880CS5#TRPBF Overview
There is a SOT-23-5 case package that contains the instrumentation amplifiers. Linear amplifier is delivered in a Tape & Reel (TR) case. 5 pins are available on the instrumentation amplifier. Op amp ic rates 150μV for input offset voltage. The buffer amplifier is capable of operating from a supply current of 1.5mA . It is a member of the 124.08dB's 124.08dB family. On this instrumentation amplifier, there are 1 circuits that are connected together. Instrumentation amplifier has 1 channels on it. It should not lower than 0°C to operate buffer amplifier. You should not use op amp above 70°C degrees. There are 1 elements in total in this linear amplifier. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 40V. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.4V. As a general rule, you should conduct this electronic component under dual supply voltages of 18V volts.
LT1880CS5#TRPBF Features
124.08dB voltage gain
LT1880CS5#TRPBF Applications
There are a lot of Analog Devices, Inc. LT1880CS5#TRPBF Instrumentational OP Amps applications.
- Industrial applications including automation
- pH (acidity)
- Communication
- Signal operation
- Hand-held batteries
- ECG equipment
- Image computer boards
- Automatic control
- Large motor controllers
- Signal amplification