LT1784IS6#TRPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Packaging | Tape & Reel (TR) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 750μA |
| Slew Rate | 2.1 V/μs |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 250nA |
| Output Current per Channel | 27mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Gain Bandwidth Product | 2.5MHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Dual Supply Voltage | 9V |
| Min Dual Supply Voltage | 1.25V |
| Nominal Gain Bandwidth Product | 2.5MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1784IS6#TRPBF Overview
The linear amplifier is packaged in a SOT-23-6 case. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. 6 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 3.5mV. A supply current of 750μA can be used to operate this linear amplifier. There should be no change in the voltage gain. On this buffer amplifier, there are 1 circuits. On the buffer amps, there are 1 channels that can be used. The temperature should not be lower than -40°C for operational amplifier ics to operate. You should only use op amp buffer at temperatures that are no higher than 85°C. There are a total of 1 elements in this linear amplifier. I would like to point out that this electrical component is capable of working from a voltage below 18V as far as the power supply is concerned. To keep the buffer amps' supply voltage higher than 2V. This electronic part should be conducted with a dual supply voltage of 9V volts for this part.
LT1784IS6#TRPBF Features
120dB voltage gain
LT1784IS6#TRPBF Applications
There are a lot of Analog Devices, Inc. LT1784IS6#TRPBF Instrumentational OP Amps applications.
- Differentiator circuits
- Video conversion and routing
- Signal filtering
- Vehicle electronics
- Professional videography
- Tablets
- Signal amplification
- Comparator
- Medical instruments
- earphone