LT1713IMS8#PBF
| Parameters | |
|---|---|
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2001 |
| Series | UltraFast™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1713 |
| Pin Count | 8 |
| Output Type | CMOS, Complementary, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Output Current | 20mA |
| Propagation Delay | 11 ns |
| Quiescent Current | 7.5mA |
| Supply Current-Max | 9mA |
| Response Time | 9 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.4V~12V ±2.4V~6V |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 69.54dB |
| Average Bias Current-Max (IIB) | 5μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6.3V |
| Input Bias Current | 2μA |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Current - Quiescent (Max) | 7.5mA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 2μA @ 5V |
| Hysteresis | 100 mV |
LT1713IMS8#PBF Overview
For convenience, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .A comparator with a CMOS, Complementary, Rail-to-Rail, TTL output is used here.The part is shipped by Tube .The device is designed with 8 terminations.The electrical component in this case belongs to the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.Speaking of types, this is a typical with Latch comparator.This is a 1 element comparator.There are 8 pins on this board.Surface Mount universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .Electronic comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching LT1713 .There is a quiescent current of 7.5mA in this comparator.The device can be run with 3/5V power supplies.The voltage formula shows that the part has a voltage gain of 69.54dB .The part can be powered at a minimum current of 9mA .The part is from UltraFast? comparator series.
LT1713IMS8#PBF Features
CMOS, Complementary, Rail-to-Rail, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 7.5mA
Voltage Gain: 69.54dB
LT1713IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1713IMS8#PBF linear comparators applications.
- RC Timers
- General Purpose Low Voltage Applications
- Wireless Base Stations
- System control and monitoring
- Power management
- Wearable Devices
- Building automation
- Alarm and Monitoring Circuits
- Ultra-Low Power Systems
- High-Speed Sampling Circuits