LT1713IMS8
| Parameters | |
|---|---|
| Package / Case | MSOP |
| Number of Pins | 8 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Output Type | TTL |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.4V |
| Max Supply Current | 6.5mA |
| Current - Output | 20mA |
| Propagation Delay | 11 ns |
| Quiescent Current | 7.5mA |
| Response Time | 8 ns |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 2μA |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 69.54dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 1.2V |
| Hysteresis | 100 mV |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
LT1713IMS8 Overview
Electronic comparator is packaged in MSOP for convenient transportation.The comparator has a TTL output.The total number of elements is 1 .The comparator has 8 pins.A quiescent current of 7.5mA is displayed by this comparator.If the current supply exceeds 6.5mA , the comparator might be damaged.The voltage gain of the part is indicated by 69.54dB in the voltage formula.Keeping the temperature below 85°C is not recommended.Temperature lower than -40°C is not suitable for the it.In the comparator, the maximum supply voltage is 12V .This comparator can be supplied with a voltage as low as 2.4V .As a result, 1 channels work together to maintain the quality of the output.This device's output current is rated at 20mA .
LT1713IMS8 Features
TTL output capability
Employing 1 elements
Quiescent Current: 7.5mA
Voltage Gain: 69.54dB
LT1713IMS8 Applications
There are a lot of Analog Devices, Inc. LT1713IMS8 linear comparators applications.
- System control and monitoring
- General-Purpose, Low-Voltage Applications
- Wide Range VCO; MOS Clock Timers
- Handheld Instruments
- Battery-Powered Electronics
- Automatic Test Equipment
- Infotainment & cluster
- General-Purpose Portable Devices
- Zero-Crossing Detectors
- High-Speed Sampling Circuits