LT1674CS#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2.1V |
| Operating Supply Current | 1.9μA |
| Slew Rate | 0.005 V/μs |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 25pA |
| Output Current per Channel | 1.5mA |
| Input Offset Voltage (Vos) | 375μV |
| Bandwidth | 12 kHz |
| Gain Bandwidth Product | 12 kHz |
| Voltage Gain | 113.98dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.1V |
| Nominal Gain Bandwidth Product | 12 kHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1674CS#PBF Overview
The linear amplifier is packaged in a SOIC case which makes it easy for the consumer to handle. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 375μV. This op amp can operate from a supply current at 1.9μA. There should be no change in the voltage gain. A instrumentation amplifier like this has 4 circuits. The op amp ic has 4 channels on it. For the buffer op amp to operate properly, it must be above the temperature of 0°C degrees Celsius. You should not use op amp above 70°C degrees. There are a total of 4 elements in this linear amplifier. I would like to point out that this electrical component is capable of working from a voltage below 36V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.1V at all times. As a general rule, you should conduct this electronic component under dual supply voltages of 18V volts.
LT1674CS#PBF Features
113.98dB voltage gain
LT1674CS#PBF Applications
There are a lot of Analog Devices, Inc. LT1674CS#PBF Instrumentational OP Amps applications.
- Micro signal measurement
- Power generator
- Communication device
- Signal filtering
- Differentiator circuits
- Cinema or auditorium audio system
- High input resistance broadband
- Switching amplifier
- Inverse/same-phase proportional circuit
- Oscilloscopes