LT1354CN8#PBF
| Parameters | |
|---|---|
| Operating Supply Current | 1mA |
| Max Supply Current | 1.2mA |
| Slew Rate | 400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 78 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~15V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 12MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 12000 kHz |
| Voltage Gain | 91.13dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Power Supply Rejection Ratio (PSRR) | 92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Bias Current-Max (IIB) @25C | 0.3μA |
| Dual Supply Voltage | 3V |
| Nominal Gain Bandwidth Product | 12MHz |
| Height | 3.3mm |
| Length | 10.16mm |
| Width | 6.48mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| Series | C-Load™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1354 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
LT1354CN8#PBF Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp ic of the Voltage Feedback type. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 8. The pins on this board total to 8 in total. This linear amplifier should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp rates 300μV as input offset voltage. Through Hole is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . This op amp can operate from a supply current at 1mA. There should be no change in the voltage gain at 91.13dB. 1 channels are available on the instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 9V. Buffer op amp series numbers are indicated by the C-Load?.
LT1354CN8#PBF Features
8 Pins
supply voltage of 15V
91.13dB voltage gain
LT1354CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1354CN8#PBF Instrumentational OP Amps applications.
- Non-polarized electrodes
- Signal operation
- Weak signal detection
- Laptop
- Band-pass filter
- Signal transformation
- Portable electronic products powered by batteries
- Active probe
- Integrator circuits
- Addition operation circuits