LT1217CS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 10V |
| Operating Supply Current | 1mA |
| Slew Rate | 500 V/μs |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 100nA |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 10MHz |
| Voltage Gain | 105dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Max Dual Supply Voltage | 15V |
| -3db Bandwidth | 10MHz |
| Min Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 10MHz |
| Number of Amplifiers | 1 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1217CS8#PBF Overview
The linear amplifier is packaged in a SOIC case which makes it easy for the consumer to handle. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. It is possible to operate this buffer amplifier from a supply current of 1mA . There should be no change in the voltage gain. The buffer amp consists of 1 circuits in total. The op amp ic has 1 channels on it. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. At temperatures greater than 70°C, op amp should not be used. A total of 1 elements are present in this linear amplifier. This electric component can work from a voltage of under 36V as far as supply voltage is concerned. As a rule of thumb, the supply voltage of the op amp should not be lower than 10V. This electronic part should be conducted with a dual supply voltage of 15V volts for this part. The linear amplifier has 1 amplifiers.
LT1217CS8#PBF Features
105dB voltage gain
LT1217CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1217CS8#PBF Instrumentational OP Amps applications.
- Test equipment
- Switching amplifier
- Information processing
- Multimedia playback equipment
- Proportional operation circuits
- Professional videography
- Vehicle electronics
- Portable docking station
- Band-pass filter
- Weak signal detection