LT1213ACN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | LT1213 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 3.4mA |
| Slew Rate | 12V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 70nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~36V ±1.25V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 75μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 28000 kHz |
| Voltage Gain | 118.59dB |
| Average Bias Current-Max (IIB) | 0.16μA |
| Power Supply Rejection Ratio (PSRR) | 93dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 125μV |
| Bias Current-Max (IIB) @25C | 0.16μA |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 28MHz |
| Height Seated (Max) | 3.937mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1213ACN8#PBF Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. Op amps are General Purpose types of amplifier on the chip. Linear amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 15V. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 75μV. This electronic part is best mounted with type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. As long as the supply current of the chip does not exceed 3.4mA, this op amp ic can operate. 118.59dB should remain the voltage gain. This op amp ic has 2 circuits. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply.
LT1213ACN8#PBF Features
8 Pins
supply voltage of 15V
118.59dB voltage gain
LT1213ACN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1213ACN8#PBF Instrumentational OP Amps applications.
- Ultrasound transducers
- Logarithmic operation circuits
- Semiconductor detectors
- High gain DC amplifier
- Exponential operation circuits
- E-book readers
- Weak signal detection
- Inverse/same-phase proportional circuit
- Navigation
- Communication