LT1187CS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Applications | Differential |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1187 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Operating Supply Current | 13mA |
| Max Supply Current | 15mA |
| Slew Rate | 165V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 4.75V~16V ±2.38V~8V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 5700 kHz |
| Average Bias Current-Max (IIB) | 3.5μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Supply Voltage Limit-Max | 9V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 3.5μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Bias Current | 2μA |
| Nominal Gain Bandwidth Product | 50MHz |
| Wideband | NO |
| Height | 1.5mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1187CS8#PBF Overview
This package is packaged as a Tube.8-SOIC (0.154, 3.90mm Width) package reduces space by making class d amp available.As a result of audio amplifiers high performance, audio amplifier is a great choice for Differential.A Surface Mount mounting method is used to connect audio power amplifier to the PCB.A number of 1 circuits are utilized to enhance the audio ic's flexibility of the system.Audio amp can be located by using LT1187 as the base part number.There is 8 pin count on this board.Digital amplifier consists of 8 terminations.The audio power amplifier is included in Operational Amplifier.A 13mA supply current is used for operation.Amplifier ic is constructed using 8 pins.In order to operate properly, the temperature must be below 70°C.At least 0°C is recommended as the operating temperature.Using a voltage of 5V allows high efficiency.A OPERATIONAL AMPLIFIER amplifier type is present in the audio amplifier.During audio amplifier ics use, 5V supply voltage is provided.
LT1187CS8#PBF Features
Operational Amplifier subcategory
8 pins
LT1187CS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1187CS8#PBF Video Amps and Modules applications.
- Microphone Preamplifier Circuit
- Professional Audio Equipment
- Telematics control unit
- Emergency call (eCall)
- Professional Audio Equipment
- Body Control Modules
- General-Purpose Amplifier Applications
- High-Fidelity (HiFi) Headphone Drivers
- Automotive external amplifier
- Microphone Preamplifiers