LNK6765E
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 7-SIP, 6 Leads, Exposed Pad, Formed Leads |
| Surface Mount | NO |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 45W |
| Max Power Dissipation | 59W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.4mA |
| Output Current | 15μA |
| Output Power | 40W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Width | 2.01mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6765E Overview
In the package 7-SIP, 6 Leads, Exposed Pad, Formed Leads , the ac to dc converter is embedded.The AC/DC power converter type is Tube .There is a mounting point for this AC/DC converter in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.In this AC DC converter, an analog integrated circuit (IC) of type ANALOG CIRCUIT is employed.When the switching frequency reaches 120kHz~136kHz , the circuit is closed.As a result, it has a total of 6 terminations.A ac/dc converter with 6 pins is available.The product is acdc converter of the LinkSwitch?-HP manufacturer family.AC to DC converter is included in Switching Regulator or Controllers .Currently, the output current is set to 15μA .You can read the standard of REACH SVHC : No SVHC .Input voltage for the AC to DC converter is available under 265V .In the AC to DC transformer of a coverter, the output power generated is 40W .A voltage of less than 85V V can be used with the AC to DC inverter.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
LNK6765E Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 120kHz~136kHz
With 6 pins
Output Current at 15μA
LNK6765E Applications
There are a lot of Power Integrations LNK6765E AC DC Converters applications.
- LED Driver
- Utility meters
- Adapters
- Air conditioners
- AC/DC Adaptors/Chargers for E-books
- Standby Power Supplies
- Standby Power Supply
- Chargers for cell/cordless phones
- Portable audio
- AC-DC Output Power Conversion Applications