LNK302GN
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | LinkSwitch®-TN |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 12mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 66kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 200μA |
| Output Current | 80mA |
| Topology | Buck, Buck-Boost, Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 72 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 69% |
| Output Isolation | Non-Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK302GN Overview
8-SMD (7 Leads), Gull Wing is the package in which the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.It is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.This AC DC converter employs SWITCHING REGULATOR analog IC type.In total, it has 8 terminations.Approximately 8 pins are present on the ac/dc converter.A total of 8 pins are present on the ac-dc converter.Surface Mount are the recommended mounting method for the ac dc converters.It is a member of LinkSwitch?-TN manufacturer family.The number of outputs to run is 1 .We are setting the output current to 80mA .Its output voltage amounts to 12V .The power AC DC is capable of high efficiency when operated at a frequency of 66kHz .This is the standard of REACH SVHC : No SVHC .The AC to DC converter can be powered from the input voltage under 265V .An input voltage of less than 85V V is required to operate the AC to DC inverter.A minimum voltage of 85V is required across the converter.Across the converter, a maximum supply voltage of 265V may be applied.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .This output is configured to use Adjustable .
LNK302GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
With 8 pins
Output Current at 80mA
Output Type : Adjustable
LNK302GN Applications
There are a lot of Power Integrations LNK302GN AC DC Converters applications.
- Adapter/Charger for Cell
- Open Frame Switching Power Supply
- AC/DC Adaptors/Chargers for E-books
- Cellular phone chargers
- Standby and Auxiliary Power Supplies
- Switching AC-DC Charger
- Industrial controls
- Laptops
- Auxiliary Power Supplies
- Air conditioners