LMX339HAUD+T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LMX339 |
| Pin Count | 14 |
| Output Type | Open Drain |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 300μA |
| Output Current | 73mA |
| Max Supply Current | 300μA |
| Propagation Delay | 600 ns |
| Quiescent Current | 300μA |
| Response Time | 600 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 70dB PSRR |
| Current - Output (Typ) | 73mA @ 5V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMX339HAUD+T Overview
To facilitate transportation, it comes packaged in 14-TSSOP (0.173, 4.40mm Width) .This comparator is of the Open Drain output type.This device is designed in Tape & Reel (TR) case.You can find 14 terminals of the comparator.The component belongs to the Comparator family of electrical components.Supplied by 2.7V voltage, the comparator can accomplish the many demanding tasks.The type of the chip can be classified as General Purpose .This element consists of 4 elements in total.The pinout of the component starts from 14 pins it has.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.The comparator has 14 pins.Try search LMX339 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 300μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 300μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 300μA .The device can be powered by 3/5V power supplies.There is a maximum current that can be input into the device of 250nA .According to the voltage formula, the part has a voltage gain of 93.98dB .
LMX339HAUD+T Features
Open Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 300μA
Voltage Gain: 93.98dB
LMX339HAUD+T Applications
There are a lot of Maxim Integrated LMX339HAUD+T linear comparators applications.
- Infotainment & cluster
- Portable and Battery-Powered Systems
- General Purpose Low Voltage Applications
- Automatic Test Equipment
- Appliances
- High-Speed Differential Line Receiver
- Battery-Powered Electronics
- Hand-Held Electronics
- Mobile Phones and Tablets
- Zero-Crossing Detectors