LMV614MA/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Bulk |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TUBE |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LMV614 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Elements | 4 |
| Power Supplies | 2/5V |
| Operating Supply Current | 116μA |
| Nominal Supply Current | 105μA |
| Output Current | 30mA |
| Slew Rate | 0.42V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 14nA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 5.5mV |
| Gain Bandwidth Product | 1.5MHz |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.035μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | YES |
| Max Frequency | 10kHz |
| Bias Current-Max (IIB) @25C | 0.035μA |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV614MA/NOPB Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. A Bulk case is used to deliver the buffer op amp. It is estimated that there will be 14 terminations in the next few months. The pins on this board total to 14 in total. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 14 pins are included on the operational amplifiers. Op amp rates 5.5mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . Operational amplifier can operate supply current at 116μA. The voltage gain should stay at 100dB. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There are a total of 4 elements in this linear amplifier. As a result of this, the buffer amplifier is packed in TUBE.
LMV614MA/NOPB Features
14 Pins
supply voltage of 2.7V
100dB voltage gain
Output Type: Rail-to-Rail
LMV614MA/NOPB Applications
There are a lot of Texas Instruments LMV614MA/NOPB Instrumentational OP Amps applications.
- Oscilloscopes
- Laptop
- Weak signal detection
- Exponential operation circuits
- Semiconductor detectors
- Video computer boards
- Ultrasound transducers
- Switching amplifier
- Signal filtering
- Image computer boards